RSS

Tag Archives: Hubbell Products

Equipment

Equipment

63 AMP PRODUCTS DELIVER POWER IN INTERNATIONAL WATERS

For those of us who call stateside home, traveling to foreign ports can often present a minefield of problems one just has to navigate through. Besides the usual waiting time for customs clearance, and the sometimes grueling and seemingly never ending inspection process, visiting boaters trying to plug their boats into dockside power can leave one no other choice but to run the on board generator to keep things going.

Now U.S. boats destined for international waters can rely on safe ship-to-shore power options from Hubbell and its 63 amp, 230 volt products. This is the only CE-certified electrical shore power system dedicated to overseas use.

hub21816-x7hWhile featuring traditional marine styling, Hubbell’s 63 amp products are intended for use with 50 cycle systems only, and not interchangeable with US systems. Like other Hubbell international shore power offerings, this configuration utilizes standard NEMA designs not normally found in the marine market.

Constructed of 316 stainless steel, the 63 amp products resemble ordinary shore power fixtures. Built to Hubbell’s high quality standards, they offer a watertight seal. A nickel-plated rear enclosure and contact blades ensure corrosion resistance. The unique thermoset interior resists arcing and heat build-up 400% more than typical interiors. Pressure-screw terminals deliver secure terminations.

Hubbell also offers 100, 125 and 200 amp pin and sleeve shore power systems, including back boxes and feed-through boxes for inlets and receptacles.

Contact Hubbell Marine Electrical Products, 40 Waterview Dr., Shelton, CT 06484.
475-882-4838; Fax: 203-783-9195. www.hubbell-marine.com

 

Advertisements
 
Leave a comment

Posted by on July 23, 2014 in Equipment

 

Tags: , , ,

Products


QUALITY, SAFETY ARE KEY SHORE POWER CORD CONSIDERATIONS

Shore power cords, and the electricity they transfer, help bring convenience and comfort aboard boats, yet can become dangerous fire and electrocution risks if they fail.  Care should be taken when selecting shore power cords to ensure reliability and safety are the top considerations.

To be watertight, the cord should be totally encased in solid PVC material.  For flexibility, lightweight jute filler inside the cord jacket makes cable coil neatly and lay flat.  This is particularly important in colder climates.

Devices such as a strain relief bull ring alleviate stress on the conductors caused by boat movement, crew traffic and rough handling.  A molded flexneck helps prevent right-angle cable damage, as well as accidental pullout of the cord.

Proper preventive maintenance is very important for safe dockside use of electricity.

To prevent overheating and burnout, a copper crimp barrel termination, the type used by power companies, is superior to brass.  Copper barrel sleeves—when used to crimp the wires to each terminal—provide more secure connections, better conductivity and longer life.

A locking ring should be present for proper alignment of the connector to the inlet.  This allows for a completely waterproof connection and prevents accidental disengagement.  The shore power cord should incorporate line-up notches or a similar visual indication that the contact is locked or unlocked.

Some shore power cords utilize indicator lights to visually confirm that power is flowing.  Likewise, some models also have warning lights to show that incorrect, dangerous wiring conditions exist at the power source.  Any such visual indicators should be molded into the cordset connection and fully watertight.

It’s important to know when a cord needs to be replaced.  If the jacket is frayed and wire exposed, it’s unsafe.  Electrical shorts and a cord that’s warm to the touch also indicate it’s time to buy new.  Any singe marks or discoloring around the male or female cord ends are a warning the cord must be immediately replaced.

Made in the USA, Hubbell electrical products are built with the highest quality terminations and materials.  Founded in 1888, Hubbell is a multi-billion dollar, global electrical and wire products manufacturer that serves many industries.  It marine electrical products include UL Listed shorepower inlets, cablesets, adapters, plugs, connectors, weatherproof plates, ground fault receptacles and accessories from 15-200 amps.

Contact Hubbell Marine Electrical Products, 40 Waterview Dr., Shelton, CT  06484. 475-882-4838
Fax: 203-783-9195.  www.hubbell-marine.com

 
2 Comments

Posted by on March 9, 2012 in Products

 

Tags: ,